Reaction Torque Sensor
The reaction torque sensor has a small flange structure connection. It is good for compact structure, durability and free-maintenance. The reaction torque sensor is based on strain gauge technology, which can provide high-precision signal transmission. When used with a torque transmitter, it can directly output standard electrical signals: 4-20mA, 0-5V, RS485, etc. The reaction force torque sensor is used to measure static torque and dynamic rotation (rotation angle cannot exceed 360 degrees) in both clockwise and counterclockwise directions. Key application areas include torque wrench quality inspection, actuator and valve testing, fastener testing, pump testing and robotic arm joint torque monitoring.
SKU: ATO-TQS-S01
Reation torque sensor for static torque measurement, 20 Nm~10000 Nm range, double-flange structure without mounting base, easy to install.
SKU: ATO-TQS-S02
5/30/100/200 Nm reation torque sensor special for torque wrench calibration, flange to square groove, low cost, easy to measure forward and reverse torque.
SKU: ATO-TQS-S03
Reation torque sensor with measuring range 2 Nm~200 Nm, one end flange and one end square drive structure, also good for torque wrench calibration.
SKU: ATO-TQS-S04
Micro reation torque sensor adopts high-quality strain gauge, aluminum alloy shell, diameter 37.6mm, minimum range 0~0.5 Nm/maximum range 0~150 Nm.